Selective Laser Melting (SLM) Service

  • Selective Laser Melting 3D Printing Services Online
  • Aluminium and Stainless Steel
  • Manufacturing From 7 Business Days

Upload your CAD files for an instant quote.

Get an Instant Quote
All uploads are secure and confidential.

Selective Laser Melting (SLM) Services

Selective Laser Melting (SLM), also known as Direct Metal Laser Sintering (DMLS), is a metal 3D printing technology that selectively fuses a fine metal powder in aluminium or stainless steel. This 3D printing technology is used to manufacture both prototypes and production parts, especially with very complex features and all-in-one assemblies.

Try Xometry Out Now In Just A Few Steps

Upload your files
1
Upload your files

Multiple designs for different parts can be imported at the same time to produce a single quote. In less than a minute, a detailed cost estimation appears on the screen.

Choose the process
2
Choose the process

First, select the manufacturing process you require. You can then choose from over 130 materials, including metals and plastics, and from a wide range of finishes and certifications.

Order your parts online
3
Order your parts online

Once you have selected the required options, all you need to do is confirm the order and pay for it on the secure payment platform. Your design will be analysed by Xometry engineers.

Receive your parts
4
Receive your parts

Within a short amount of time, you will receive the parts you ordered directly to your shipping address. You can track your package at any time in your personal account.

Advantages of SLM with Xometry

Massive Capacity

Massive Capacity

We can quickly produce both prototypes and large batches thanks to the largest manufacturing network, with over 10,000 vetted partners

Fast Production

Fast Production

You will get your 3D printed parts fast delivered in as fast as 3-5 days.

Quality Assurance

Quality Assurance

We have strong QA procedures, controlled by an in-house team of QA engineers, which allows us to deliver high quality parts.

Engineering Check & Status Updates

Engineering Check & Status Updates

All designs are checked by engineers before they’re sent for 3D printing. After confirming your order, you will receive status updates on your production.

Materials for SLM 3D Printing

Aluminum Alloy
  • Aluminium Al-Si10Mg
Stainless Steel
  • Stainless Steel 17-4PH
  • Stainless Steel 316L
Titanium Alloy
  • Ti-6Al-4V

Finishing Options for SLM 3D Printing

Pros & Cons of SLM 3D Printing

Advantages Considerations
Complex Geometries: SLM makes it possible to manufacture parts that cannot be produced with subtractive manufacturing Surface roughness is higher than with CNC machining
Powdered metals used for SLM 3D printing possess strong mechanical properties Higher costs than other manufacturing technologies
Variety of mechanical and electro-chemical post-processing options applicable for final part enhancement Limited volume size

SLM Manufacturing Specifications & Capabilities

SLA

MJF SLS FDM SLM
Lead time 3 Days 3 Days 3 Days 3 Days 5 Days
Build volume up to 736 x 635 x 533 mm up to 380 x 284 x 380 mm;, while we normally recommend the maximum size of 356 x 280 x 356 mm up to 340 x 340 x 605 mm;hile we normally recommend the maximum size of 320 x 320 x 580 mm up to 914 x 610 x 914 mm up to 119 x 189 x 300 mm;Recommended size: within 100 x 100 x 150 mm
Layer thickness min 0.02mm ~ 0.08 mm ~ 0.1 mm,and for water-tight parts 1.5 mm, when wall thickness is higher ~ 0.05–0.3 mm ~ 0.1 mm
Minimum feature size 0.1 mm 0.5 mm,Recommended size 0.7 mm 0.5 mm,Recommended size 0.75 mm up to 0.2 mm 1.0 mm
Tolerance ±0.2%(± 0.2 mm) ±0.3%(± 0.2 mm) ±0.3% (± 0.3 mm) ±0.3%(± 0.3 mm) ±0.1% (±0.1 mm). However, tolerances are not guaranteed on the first attempt at a new design
描述说明 A technology that produces extremely accurate and high-resolution parts One of the most popular and inexpensive technologies for industrial 3D printing A technology that produces highly accurate and durable parts at fast speeds, especially compared to other powder bed fusion technologies Widely known for a great material selection, accuracy, and possibility to print large parts Metal 3D printing technology. Selectively fuses a fine metal powder in aluminium or stainless steel
Read more about SLA Read more about MJF Read more about SLS Read more about FDM Read more about SLM

SLM 3D Printing Resources

Direct Metal Laser Sintering (DMLS) 3D printing: Technology overview

Direct metal laser sintering (DMLS) belongs to the powder bed fusion (PBF) category of 3D printing and is similar to the SLS technology. In DMLS, however,...

Read more 

Design Tips for Selective Laser Melting 3D Printing

Selective Laser Melting (SLM), also known as Direct Metal Laser Sintering (DMLS) is a metal 3D printing technology that creates parts from metal powder....

Read more 

Order 3D Printed Parts Online

Customers
40,000+
Parts Quoted
1 Million+
Get an Instant Quote

All uploads are secure and confidential.