Materials
All these materials are available in the Xometry Instant Quoting Engine. If you require a different, material please specify it as custom when you make a request.
![](static/picture/DSC_0572-1-480x317.jpg)
Aluminium 3.4365
Alternative Designations: EN-AW7075 | Al-Zn6MgCu
Aluminium 3.4365/EN-AW7075 has high strength (57MPa), toughness and excellent resistance to fatigue. It has very good machinability.
![](static/picture/DSC_0347-1-480x320.jpg)
Aluminium 3.3211
Alternative Designations: EN-AW6061 | Al-Mg1SiCu
Aluminium 3.3211/EN-AW6061 contains magnesium and silicon as its major alloying elements with trace amounts of copper.
![](static/picture/DSC_0541-480x331.jpg)
Aluminium 3.3206
Alternative Designations: EN-AW6060 | Al-MgSi
Aluminium 3.3206/EN-AW6060 has good resistance to corrosion, good weldability and very suitable for cold forming.
![](static/picture/Sheet-metal-bend-edited-480x320.jpg)
Aluminium 3.2315
Alternative Designations: EN-AW6082 | Al-Si1Mg
Typically formed by rolling and extrusion, Aluminium 3.2315 has medium strength with very good weldability and thermal conductivity.
![](static/picture/Sheet-metal-bend-edited-480x320.jpg)
Aluminium 3.1645
Alternative Designations: EN AW–2007 | 3.1645 | AlCuMgPb
Aluminium 3.1645 is a short chipped aluminum alloy containing between 4.0 – 5.0% copper. It is very suitable for high machining speeds.
![](static/picture/DSC_0614-edited-480x320.jpg)
Steel 1.0570
Alternative Designations: St52-3
Compared to other carbon steels, Steel 1.0570 has high electrical conductivity but low thermal conductivity and low ductility.
![](static/picture/DSC_0619-1-480x320.jpg)
Steel 1.0503
Alternative Designations: AF65C45
Steel 1.0503 (C45) has low thermal conductivity and low ductility among wrought carbon steels. It has a high tensile strength of 630MPa.
![](static/picture/DSC_0621-edited-480x320.jpg)
Steel 1.7225
Alternative Designations: 42CrMo4
Steel 1.7225 has high strength, toughness, good hardenability and resistance to impact. It is widely used in the construction of machines
![](static/picture/DSC_0091-edited-480x320.jpg)
Steel 1.7131
Alternative Designations: 16MnCr5
Steel 1.7131 has high surface hardness and wear resistance with good machinability. It is ideal for machine components.
![](static/picture/DSC_0600-480x320.jpg)
Steel 1.0038
Alternative Designations: EN 10025 | S235JR
Steel 1.0038 can be formed into many products. Its excellent weldability makes it to be widely used in bridges, transmission towers etc.
![](static/picture/DSC_0089-edited-480x320.jpg)
Stainless Steel 1.4571
Alternative Designations: X6CrNiMoTi17-12-2
Stainless Steel 1.4571 contains a small amount of titanium (about 0.5%). It has good machinability but cannot be hardened by heat treatment.
![](static/picture/DMLS-Part-Steel-1-480x320.jpg)
Stainless Steel 1.4404
Alternative Designations: 316L | X2CrNiMo17-12-2
The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non oxidizing acid.
![](static/picture/DSC_0076-edited-480x320.jpg)
Stainless Steel 1.4301
Alternative Designations: X5CrNi18.10
Stainless steel 1.4301 is chromium-nickel austenitic stainless steel. The chromium element gives it excellent corrosion resistance.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Copper 2.0065
Alternative Designations: E-Cu58Ms58
Copper 2.0065 has high electrical conductivity. Its good machinability makes it easy to shape into different forms.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Copper 2.0060
Alternative Designations: Cu-ETP
Copper 2.0060 has high conductivity and high corrosion resistance. It has a tensile strength of 360MPa. It has excellent machinability.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Brass 2.0401
Alternative Designations: CuZn39Pb3
Brass 2.0401 has excellent hot formability and can easily be soldered or brazed. It has very good free-cutting.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Titanium 3.7164
Alternative Designations: Titan Grade 5 | 6Al-4V9
Titanium 3.7164 has exceptional strength compared to pure titanium but retains the same stiffness and thermal properties.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Titanium 3.7035
Alternative Designations: Titan Grade 2
Titanium 3.7035 has excellent strength-to-weight ratio with good resistance to corrosion. Its thermal stresses are low.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
UHMW PE
Alternative Designations: Ultra high molecular weight polyethylene
UHMW PE is extremely tough and has high resistance to abrasion and wear. It is corrosion resistant and self-lubricating.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PTFE
Alternative Designations: Teflon
PTFE (Teflon) is a highly slippery material with excellent resistance to extreme temperatures. It has outstanding insulating properties.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
POM
Alternative Designations: Delrin, Acetal
POM is an easy resin for molding. It has a relatively high tensile strength as well as high resistance to wear, creep and warp.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Acrylic
Alternative Designations: PMMA
Acrylic (PMMA) is the most common form of clear, moldable thermoplastic, often used in place of glass due to its higher resistance.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PEEK
Alternative Designations: Polyetheretherketone
PEEK is used in the production of components such as tubes, bearings, seals, valves, electric insulation and even medical implants.
![](static/picture/fdm-polycarbonate-480x480.jpg)
PC
Alternative Designations: Polycarbonate
PC – Polycarbonate is a naturally transparent plastic with high strength and durability on impact. It is shatter resistant and heat resistant.
![](static/picture/FDM-ABS-part-480x320.jpg)
ABS
Alternative Designations: Acrylonitrile Butadiene Styrene
ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic material widely known for its high resistance to impact and toughness.
![](static/picture/Glass-Filled-SLS-3D-printing-480x480.jpg)
Nylon PA 12 Glass-Filled (SLS)
Alternative Designations: PA12GB
This is a whitish polyamide 12 powder that is glass filled. Its stiffness is excellent and it has good elongation at break.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 12 Food Grade Whitish
Alternative Designations: Food Grade SLS PA12 Whitish
This material produces functional parts of the highest quality. It has a well-balanced property profile with excellent constant behaviour.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 12 Alumide Grey
Alternative Designations: PA12 Alumide Grey / MJF PA12CB
This material is a metallic grey polyamide powder filled with aluminium. It has high stiffness and good post processing abilities.
![](static/picture/DSC_0098-edited-480x320.jpg)
Nylon PA 12 (SLS)
Alternative Designations: Polyamide 12
Nylon produces parts with long-term durability that is similar to that of standard plastic parts. Excellent stability for a long time.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 11 Food Grade
Alternative Designations: PA11 BLUE – Food grade
This material produces parts with blue colour. It consists of a food compliant PA11 powder. It is often applied in the production of nozzles.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Carbon Fiber Reinforced Polyamide 12
Alternative Designations:
This fibre composite material is made from the PA12 thermoplastic with approximately 35% carbon fibre about 0.15mm fibre length.
![](static/picture/fdm-abs-m30-black-480x480.jpg)
ABS M30
Alternative Designations: Acrylonitrile butadiene styrene M30
ABS M30 is a high impact resistant and tough material: it has a glass transition temperature of about 105°C.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PP
Alternative Designations: Polypropylene
PP (Polypropylene) has excellent resistance to moisture and chemicals, impressive impact strength and good elasticity.
![](static/picture/CE_221-3-480x480.jpg)
CE 221
Alternative Designations: Cyanate ester
CE 221 has long-term thermal stability with glass transition temperature of about 225°C. It has a tensile strength of 92MPA.
![](static/picture/UMA-90-480x480.jpg)
UMA 90
Alternative Designations: Urethane Methacrylate
UMA 90 produces smooth surface finish with excellent mechanical properties. It has high stiffness and strength.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
DPR 10
Alternative Designations: Digital Production Resin
DPR 10 offers high accuracy and quick printability, and its rigidity makes it suitable for models and dies.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
EPX 82
Alternative Designations: Epoxy
EPX 82 has an excellent blend of toughness, stiffness, temperature resistance and high tensile strength of 82MPa.
![](static/picture/FPU-50-DLS-480x480.jpg)
FPU 50
Alternative Designations: Flexible Polyurethane
FPU 50 is robust and semi-rigid. It is suitable for applications that require toughness to withstand repetitive loading.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
RPU 70
Alternative Designations: Rigid Polyurethane
RPU 70 is a stiff material with high strength. It has moderate resistance to heat with heat deflection temperature of 60°C.
![](static/picture/sla-accura-xtreme-white-480x480.jpg)
Xtreme White 200 Polypropylene
Alternative Designations: Accura Xtreme White 200
Xtreme White 200 Polypropylene has high elongation at break, high impact strength with excellent toughness. It is stiff and durable.
![](static/picture/sla-accura-xtreme-grey-480x480.jpg)
Xtreme Grey Polypropylene
Alternative Designations: Accura Xtreme Grey
Xtreme Grey Polypropylene has excellent toughness and is resistant to breakage. It is ideal for snap fits used in electronic products.
![](static/picture/sla-somos-watershed-xc-11122-480x480.jpg)
Watershed XC 11122 ABS/PBT – Like
Alternative Designations:
Watershed XC is a low viscous material that produces parts that are strong, tough, water-resistant and most importantly, nearly colourless.
![](static/picture/fdm-ultem-9085-tan-480x480.jpg)
ULTEM 9085
Alternative Designations:
ULTEM 9085 has a high strength – to – weight ratio, high impact strength with good heat resistance. It is highly flame retardant.
![](static/picture/fdm-ultem-1010-480x480.jpg)
ULTEM 1010
Alternative Designations:
ULTEM 1010 has the highest heat resistance, chemical resistance and tensile strength compared to other FDM thermoplastics.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PEEK
Alternative Designations: Polyetheretherketone
PEEK is used in the production of components such as tubes, bearings, seals, valves, electric insulation and even medical implants.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PETG
Alternative Designations:
PETG has significant chemical resistance, durability and good formability. It has low forming temperatures making it popular in consumer applications.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PLA
Alternative Designations: Polyactic Acid
PLA is derived from renewable sources and is biodegradable. It can easily be melted and shaped without losing its mechanical properties.
![](static/picture/fdm-polycarbonate-480x480.jpg)
PC
Alternative Designations: Polycarbonate
PC – Polycarbonate is a naturally transparent plastic with high strength and durability on impact. It is shatter resistant and heat resistant.
![](static/picture/sla-accura-48-480x480.jpg)
PC – Like Heat Resist Translucent
Alternative Designations: Accura 48
PC – Like Heat Resist Translucent is best suited for parts that require high strength and stiffness with high temperature resistance.
![](static/picture/fdm-polycarbonate-iso-translucent-natural-480x480.jpg)
PC – ISO Polycarbonate
Alternative Designations:
PC – ISO Polycarbonate has a tensile strength of 57MPa with a heat deflection temperature of 133°C. It is a strong, heat resistant material.
![](static/picture/fdm-polycarbonate-abs-480x480.jpg)
PC – ABS
Alternative Designations: PC – ABS Polycarbonate
PC – ABS Polycarbonate blends the ease of processing of ABS with the high strength and mechanical properties of PC.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 12 Carbon-Filled
Alternative Designations:
The blend of Nylon 12 resin with chopped carbon fibre gives this material excellent structural properties.
![](static/picture/Media-tumbled-Nylon-PA-12-glass-filled-HP-MJF-480x480.jpg)
Nylon PA 12 Glass-Filled (MJF)
Alternative Designations:
Compared to the Nylon PA12, this has enhanced compressive strength with improved heat distortion temperature.
![](static/picture/Media-tumbled-Nylon-PA-11-HP-MJF-480x480.jpg)
Nylon PA 11
Alternative Designations:
Nylon PA11 material is highly impact resistant with a shore hardness of 80. It is 100% biocompatible with up to 70% reusability.
![](static/picture/fdm-asa-light-gray-480x480.jpg)
ASA
Alternative Designations: Acrylonitrile Styrene Acrylate
ASA (Acrylonitrile Styrene Acrylate) is an amorphous thermoplastic with improved weather resistance. It is widely used in prototyping in 3D printing.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
ABS SL 7820
Alternative Designations:
With a black appearance, ABS SL 7820 is rigid and tough. It allows for accurate and robust build with good surface finish and detail.
![](static/picture/FDM-ABS-part-480x320.jpg)
ABS
Alternative Designations: Acrylonitrile Butadiene Styrene
ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic material widely known for its high resistance to impact and toughness.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
ABS ESD7
Alternative Designations:
ABS ESD7 is a durable thermoplastic with electrostatic-dissipative properties. It is widely applied in the manufacturing of jigs and fixtures for electronic components.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 12 (FDM)
Alternative Designations: Nylon 12 | Polyamide 12
Nylon PA 12 is one of the most popular 3D printing materials. It has good mechanical properties such as toughness and strength.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Flex Whitish
Alternative Designations: Flex TPU/TPE-like
This material is a powder of a thermoplastic elastomer that is naturally coloured and rubber like. It produces fully functional parts.
![](static/picture/TPU-MJF-3D-Prints-Xometry-1-480x353.jpg)
Estane 3D TPU M95A
Alternative Designations:
Estane 3D TPU M95A has easy and quick printability. It is used in manufacturing projects that require both rubber and plastic properties.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
EPU 40
Alternative Designations: Elastic Polyurethane
EPU 40 is useful for ornaments and mechanical parts. It has high elastic behaviour under both tensile and compressive stress.
![](static/picture/SIL-30-480x480.jpg)
SIL 30
Alternative Designations:
SIL 30 is biocompatible as well as tear resistant. It provides comfortable skin contact. It is used in the printing of wearables.
![](static/picture/Shoe-Sole1-480x298.png)
True Silicone
Alternative Designations:
True silicone has a high resolution, an excellent surface finish, and is resistant to acids, bases and non-polar solvents.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Tool Steel MS1
Alternative Designations: 1.2709
Tool Steel MS1 is a high wear resistant material with ultra-high strength and is easily machinable. It has enhanced ductility.
![](static/picture/DMLS-Part-Steel-2-480x320.jpg)
Stainless Steel 17.4
Alternative Designations:
Stainless Steel 17.4 is a chromium-nickel copper steel with high strength and excellent toughness. It has a tensile strength of 1070N/mm2.
![](static/picture/DMLS-Part-Aluminium-480x320.jpg)
Aluminium 1706
Alternative Designations: EN - 1706 | AlSiMG
Aluminium 1706 has excellent strength at elevated temperatures (about 200°C). It has good resistance to corrosion and can be polished easily.
![](static/picture/DMLS-Part-Steel-1-480x320.jpg)
Stainless Steel 1.4404
Alternative Designations: 316L | X2CrNiMo17-12-2
The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non oxidizing acid.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Inconel 718
Alternative Designations:
Inconel 718 a nickel-chromium based high strength super alloy. It is resistant to corrosion and extreme pressure.
![](static/picture/xometry-materials-placeholder-480x284.png)
TAURUS(黑色)
Alternative Designations: 高强度耐高温光敏树脂
进口Somos Taurus材料,高韧性耐高温90℃,固化之后强度比ABS好一点,热性能和强度优良。
![](static/picture/PolyJet_Rigid_Dark_Grey-480x414.png)
Rigid Photopolymer
Alternative Designations: Rigid Opaque Material
Opaque materials are good material choices for light functional testing, patterns, and prototypes. This material gives brilliant colour.
![](static/picture/Sheet-metal-bend-edited-480x320.jpg)
Aluminium 3.2315
Alternative Designations: EN-AW6082 | Al-Si1Mg
Typically formed by rolling and extrusion, Aluminium 3.2315 has medium strength with very good weldability and thermal conductivity.
![](static/picture/Sheet-metal-bend-edited-480x320.jpg)
Aluminium 3.3547
Alternative Designations: EN AW-5083 | Al-Mg4,5Mn
Aluminium 3.3547 / EN AW-5083 is a rolled plate with moderate strength. It is widely used in the capital goods industry.
![](static/picture/DSC_0614-edited-480x320.jpg)
Steel 1.0570
Alternative Designations: St52-3
Compared to other carbon steels, Steel 1.0570 has high electrical conductivity but low thermal conductivity and low ductility.
![](static/picture/DSC_0600-480x320.jpg)
Steel 1.0038
Alternative Designations: EN 10025 | S235JR
Steel 1.0038 can be formed into many products. Its excellent weldability makes it to be widely used in bridges, transmission towers etc.
![](static/picture/DMLS-Part-Steel-1-480x320.jpg)
Stainless Steel 1.4404
Alternative Designations: 316L | X2CrNiMo17-12-2
The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non oxidizing acid.
![](static/picture/DSC_0076-edited-480x320.jpg)
Stainless Steel 1.4301
Alternative Designations: X5CrNi18.10
Stainless steel 1.4301 is chromium-nickel austenitic stainless steel. The chromium element gives it excellent corrosion resistance.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PSU
Alternative Designations: Polysulfone
PSU (Polysulfone) is a transparent material. It is tough and rigid with good thermal stability and resistance to chemicals.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PPS
Alternative Designations: Polyphenylene Sulphide
PPS has excellent strength of 80MPa and is highly rigid. It is resistant to high temperature, UV light, chemicals and creep.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PPE – PS
Alternative Designations: Polyphenylene ether – Polystyrene
PPE – PS is a blend of polyphenylene ether and polystyrene. It is highly ductile and exhibits good resistance to impact.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PS
Alternative Designations: Polystyrene
PS (Polystyrene) is a transparent, amorphous thermoplastic. It is hard, brittle, rigid and resistant to gamma radiation.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PP
Alternative Designations: Polypropylene
PP (Polypropylene) has excellent resistance to moisture and chemicals, impressive impact strength and good elasticity.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PE
Alternative Designations: Polyethylene
PE (Polyethylene) has good strength ratio. It is resistant to chemicals, impermeable and exhibits good electrical insulation properties.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PET
Alternative Designations: Polyethylene terephthalate
PET has a melting point of about 270°C; hence, molding is done at a high temperature. It is a hard material with low moisture absorption.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PEI
Alternative Designations: Ultem
With a strong environmental resistance, PEI is highly stiff and stable. It is rigid and retains its strength at high temperatures.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PC – PBT
Alternative Designations: Polycarbonate-Polybutylene Terephthalate
PC – PBT has high toughness, dimensional stability and good resistance to heat and chemicals. It has good impact resistance and stiffness.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PBT
Alternative Designations: Polybutylene terephthalate
PBT has excellent resistance to abrasion and creep. It has a low coefficient of friction and a low moisture absorption.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 6/6
Alternative Designations: Polyamide 6/6 | Nylon 6/6
PA 6/6 is the most common variant of nylon used for engineering applications. It has a high melting temperature.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Nylon PA 6
Alternative Designations: Polyamide 6 | Nylon 6
The fibers are tough but retain high tensile strength and elasticity. PA 6 is extremely resistant to wear and good electrical insulation.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
LDPE
Alternative Designations: Low Density Polyethylene
LDPE is the most flexible member of the polyethylene family. It offers good resistance to stress and pliability with good strength.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
HDPE
Alternative Designations: High Density Polyethylene
HDPE is light in weight with high strength. It is resistant to chemicals and heat, impermeable and has good electrical insulation.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
POM
Alternative Designations: Delrin, Acetal
POM is an easy resin for molding. It has a relatively high tensile strength as well as high resistance to wear, creep and warp.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Acrylic
Alternative Designations: PMMA
Acrylic (PMMA) is the most common form of clear, moldable thermoplastic, often used in place of glass due to its higher resistance.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PEEK
Alternative Designations: Polyetheretherketone
PEEK is used in the production of components such as tubes, bearings, seals, valves, electric insulation and even medical implants.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PLA
Alternative Designations: Polyactic Acid
PLA is derived from renewable sources and is biodegradable. It can easily be melted and shaped without losing its mechanical properties.
![](static/picture/fdm-polycarbonate-480x480.jpg)
PC
Alternative Designations: Polycarbonate
PC – Polycarbonate is a naturally transparent plastic with high strength and durability on impact. It is shatter resistant and heat resistant.
![](static/picture/fdm-polycarbonate-abs-480x480.jpg)
PC – ABS
Alternative Designations: PC – ABS Polycarbonate
PC – ABS Polycarbonate blends the ease of processing of ABS with the high strength and mechanical properties of PC.
![](static/picture/fdm-asa-light-gray-480x480.jpg)
ASA
Alternative Designations: Acrylonitrile Styrene Acrylate
ASA (Acrylonitrile Styrene Acrylate) is an amorphous thermoplastic with improved weather resistance. It is widely used in prototyping in 3D printing.
![](static/picture/FDM-ABS-part-480x320.jpg)
ABS
Alternative Designations: Acrylonitrile Butadiene Styrene
ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic material widely known for its high resistance to impact and toughness.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
TPE
Alternative Designations: Elastomer
TPE (Elastomer) exhibits excellent resistance to flexural fatigue. It has high impact strength and excellent chemical resistance.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
PVC
Alternative Designations: Polyvinyl chloride
PVC (Polyvinyl chloride) is the third most synthesized thermoplastic material. It is resistant to weathering, chemicals, corrosion and shock.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Aluminium ADC12
Alternative Designations: AlSi11Cu3
The ADC12 aluminium is more often used as an alternative for the A380 aluminium for parts that are highly intricate.
![](static/picture/xometry-materials-placeholder-480x284.jpg)
Aluminium A380
Alternative Designations: AlSi8Cu3
The A380 Aluminium gives an excellent combination of machinability, heat transfer and easy casting together with other properties.